-
- 15,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Padded overhead safety shutoff bar
- Taller column height provides greater overhead clearance
- Single-piece columns / model XPR-15CL
- Bolt-on column extensions / model XPR-15CL-192
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53″ tall carriage for superior strength and durability
- Electric / hydraulic power system
- Oversized A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3″
- Two-stage telescoping front and rear arms
- Automatic arm restraints
- Heavy-duty 1/2″ aircraft-quality equalizer cables
- 6” diameter machined steel cable sheaves reduces cable fatigue
- 8-piece truck and van adapter set STANDARD
- Frame cradle pads STANDARD
- Round rubber contact pads STANDARD
- ALI certified
| MODEL | XPR-15CL-192 |
|---|---|
| Lifting Capacity* | 15,000 lbs. / 6,804 kg. |
| *Max Capacity / Front Axle | 7,500 lbs. / 3,402 kg. |
| *Max Capacity / Rear Axle | 7,500 lbs. / 3,402 kg. |
| A – Height Overall: | 192.7″ / 4,895 mm* |
| B – Width Overall (Outside of Base Plate): | 155″ / 3,937 mm. |
| C – Width (Outside of Columns): | 144″ / 3,658 mm. |
| D – Floor To Overhead Switch: | 187.7″ / 4,768 mm.* |
| E – Inside Columns: | 120″ / 3,048 mm. |
| F – Reach (Front Arm Min.): | 39″ / 991 mm. |
| G – Reach (Front Arm Max.): | 60″ / 1,524 mm. |
| H – Reach (Rear Arm Min.): | 39″ / 991 mm. |
| I – Reach (Rear Arm Max.): | 60″ / 1,524 mm. |
| J – Min. Pad Height: | 5″ / 127 mm. |
| K – Rise: | 69″ / 1,753 mm. |
| L – Max Lift Height (Pad Only): | 74″ / 1,880 mm. |
| M – Max Lift Height (6″ Adapter): | 80″ / 2,032 mm. |
| N – Drive-Thru Clearance: | 106″ / 2,692 mm. |
| Motor (**) | 220 VAC / 60 Hz. 1Ph. |
| Time of full Rise: | 45 Seconds |
| Max Load Per Arm: | 3,750 lbs. / 1,701 kg. |
