The Ultimate Lift Solution for Tire Pros
BendPak’s 10AP-SRT has been designed to safely handle up to 10,000-lbs. with ease. Its short-rise, short-column design offers a max rise of roughly 46 inches, making it ideal for tire service and detailing. Plus, its compact design fits perfectly in both spacious shops and low-ceiling garages.
The AP Series combines the best features of today’s two-post lifts into a revolutionary design. Built to handle tough jobs and heavy loads, this lift ensures the safety of both the vehicle and the operator.
Unparalleled Safety with Automatic Arm Restraint
The BendPak AP Series shines with its Automatic Swing Arm Restraint System (ASARS). With a full 360-degrees of load holding grip, the heavily forged-steel design of this patented and very exclusive arm restraint system secures the lift arms firmly in place with over 2000-pounds of load-holding force, preventing unplanned swing arm movement during lift use and vehicle service operations. This revolutionary design is an adaptive system that requires minimal operator involvement and delivers unparalleled holding power. A distinctive power-hold design that allows for precise non-shifting action, and a handy quick-release operator lever allowing for the instant release of the clamping pressure.
Triple-Telescoping Nested Swing Arm Design
Revolutionary and patented swing arms are specifically tailored for varying vehicle lifting points. Unlike traditional two-post lift arms, 10AP arms retract shorter and extend farther; offering lift operators a myriad of lift arm positioning options – it’s like having the best of all worlds.
The 10AP-SRT’s patented swing arms retract shorter and extend farther than traditional lift arms. This innovative design offers more positioning options, making it versatile for varying vehicle lifting points. The three-stage arms provide greater retraction and extension for precise lifting.
Low Profile Arms
BendPak’s exclusive Low-Pro™ swing arms feature telescoping channels that have a shorter profile and a dropped-end pad receiver resulting in better serviceability on lowered chassis-height vehicles. They access hard-to-reach lift points with less hindrance providing increased versatility and less chance of damage to vehicle side skirts, running boards or ground effects. Varying height stackable adapters combined with two stage spin-up screw pads provide greater vertical pad placement for precise and safe vehicle support.
Features
- Power Side Post – The power side post holds the power unit, the safety lock release handle, and the lowering handle (which is on the power unit).
- Offside Post – The opposite Post.
- Power Unit – Provides hydraulic fluid pressure to the lift and connects to an appropriate power source. Includes the Up button, the lowering handle, and the hydraulic fluid reservoir.
- Safety Lock Release Handle – Located on the power post above the power unit, it disengages the safety locks so you can lower the lift.
- Safety Covers – Cover the safety lock mechanism on the posts.
- Floor Plates – Cover the hydraulic hoses, equalizing cables, and safety cable routed between each post.
- Lift Heads – Sometimes called carriages. Lift heads move up and down in the posts. They connect to the lift arms, so when the lift heads rise, so do the lift arms.
- Lift Arms – Extendable steel arms that attach to the lift heads.
- Adapters – Pads that contact the lifting points on the underside of the vehicles you raise. Four cradle adapters are included with your lift and are well-suited for raising trucks and SUVs (body-on-frame style). Additional adapters are available separately and include height adapters, pinch weld pads and screw adapters.
- Height Adapter Trays – Attach to the bottom of the posts, used for holding the spare adapters when not in use.
- Safety Locks – Hold the lift heads up when engaged. Multiple safety lock heights let you select the best one for your needs. Once engaged on its safety locks, the lift heads stay up, even if the lift loses power. Only leave your lift fully lowered or engaged on safety locks.
- Durable powder coat finish
- Expandable top beam accommodates wide or narrow drive-through configurations
- Double-telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Exclusive Bi-Metric™ arm design for more versatile arm positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53” & 59” tall carriages for superior strength and durability
- Electric / hydraulic HVLP power system
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3”
- Automatic arm restraints withstand over 2000-pounds of side force
- Heavy-duty ½” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Four triple-telescoping arms
- ALI certified
Specs
| Lifting Capacity | 12,000 lbs. (5,443 kg) |
|---|---|
| Maximum Capacity – Front Axle | 6,000 lbs. (2,721.5 kg) |
| Maximum Capacity – Rear Axle | 6,000 lbs. (2,721.5 kg) |
| Maximum Capacity per Lift Arm | 3,000 lbs. (1,360 kg) |
| A – Width Overall | 155 in. (3,937 mm) |
| B – Base Plate Width | 26.5 in. (674 mm) |
| C – Post Height | 93.5 in. (2,377 mm) |
| D – Drive-Thru | 102.25 in. (2598 mm) |
| E – Inside Posts | 119 in. (3,026 mm) |
| F – Outside Posts | 142 in. (3,606 mm) |
| G – Minimum Height with Pad | 4.25 in. (105 mm) |
| H – Max. Lifting Height | 46 in. (1,168 mm) |
| I – Max. Rise | 42.75 in. (1,089 mm) |
| J – Min. Height with Adapters (5 in + 2.5 in) | 11.75 in. (298 mm) |
| K – Floor Plate Height | 1.5 in. (36 mm) |
| L – Floor Plate Width | 9.5 in. (240 mm) |
| M – Front Arm Reach (Measured from the Lift Arm Pivot to the Cradle Pad Center Pin) |
26 in. min – 55.25 in. max. (659 mm min. – 1,403 mm max.) |
| N – Rear Arm Reach (Measured from the Lift Arm Pivot to the Cradle Pad Center Pin) |
29.25 in. min. – 60 in. max. (745 mm – 1,525 mm max.) |
| Safety Lock Positions | 8 |
| Standard Motor* | 208-230 VAC, 50/60 Hz, 1 Phase, 5 HP, 23 Amps |
| Time to Full Rise | ≈45 seconds |
| Sound Pressure | Lift produces less than 85dB when in operation. |
| Operating Hydraulic Pressure under Max. Load | 2,170 psi |
