Dannmar’s D4-12A gives you two lifts in one. Not only does this lift operate as an alignment system, but it also functions as a car lift. Dannmar has utilized industrial-strength slip plates and turn plates into the runways to deliver optimal results. As a result, the wheels will respond to every adjustment with effectively no resistance.
This rugged alignment lift is perfect for most shops, especially the ones that service large, low ground-clearance vehicles. This alignment system features front turn plates and rear slip plates built right into the runways. The wheels will always respond to your adjustments with free-floating and no resistance.
The D4-12A makes use of multi-caster slip plates in the rear and turn plates in the front that allow for extreme precision when making alignments. These turn plates will also provide more clearance for equipment installations. The lift can otherwise be used for most repairs or for vehicle storage, including light to medium weight storage. Put a D4-12A in your shop to take advantage of the extra floor space and increased parking capacity.
Dannmar’s D4-12A alignment lift comes equipped with robust 10.5” diameter dual-hub cable sheaves within the runway and cross tubes and 2.25” diameter axles. It also features a durable ½” diameter aircraft-quality stainless-steel lifting cable which runs through each of the four columns. The cables have been designed for constant use and offers total resistance to rubbing and other abrasions from weather, chemicals, and hydraulic oil. Other features of this high-quality lift include electric/hydraulic power, push button pneumatic lock release, adjustable height locking positions, an optional rolling bridge jack, and more.
Features
- 12,000 pound lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Heavy-duty turn plates and integrated rear slip-plates
- Multi-position turn plate pockets
- Automatic leveling system
- Multiple auto-leveling locking positions
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal “Anti-Sway” slider blocks in each column
- Oversize sheaves and heavy-duty 1/2” aircraft cable
- Rugged 1-3/8” roller axles and oversize self-lubricating cable sheaves
- Multi-position safety locks in each column with push-button safety release
- Runways adjust for different tread widths and feature non-skid surface
- Optional 6,000-lb. capacity bridge jacks available
Specs
| SKU# | 5175318 |
|---|---|
| Lifting Capacity | 12,000 lbs. (5,443 kg) |
| A – Min. Runway Height | 9.5″ (243 mm) |
| B – Max. Rise | 68.75″ (1,746 mm) |
| C – Max. Lifting Height | 79.5″ (2,019 mm) |
| D – Ramp Clearance* (Max. Rise) | 49″ (1,245 mm) |
| E – Height of Columns | 92″ (2,337 mm) |
| F – Drive-Thru Clearance | 98” (2,482 mm) |
| G – Overall Width | 127.5″ (3,239 mm) |
| H – Width Between Columns | 115.75″ (2,940 mm) |
| I – Overall Length | 233.5″ (2,940 mm) |
| J – Outside Columns | 115.75″ (2,940 mm) |
| K – Width Between Runways | 34.5″ (876 mm) or 41.5″ (1,054 mm) |
| L – Runway Centerline | 54.5″ (1,384 mm) or 61.5″ (1,562 mm) |
| M – Outside Edge of Runways | 74.5″ (1,892 mm) or 81.5″ (2,070 mm) |
| N – Runway Width | 20″ (508 mm) |
| O – Length of Runways | 194.75″ (4,947 mm) |
| Min. 4-Wheel Alignment | 106” (2,692 mm) |
| Max. 4-Wheel Alignment | 158.5” (4,026 mm) |
| Max. 2-Wheel Alignment | 163.5” (4,153 mm) |
| Min. Wheelbase @ Rated Capacity | 140” (3,556 mm) |
| Min. Wheelbase @ 75% Capacity | 120” (3,048 mm) |
| Min. Wheelbase @ 50% Capacity | 100” (2,540 mm) |
| Min. Wheelbase @ 25% Capacity | 80” (2,032 mm) |
| Locking Positions | 15 (spaced every 4” / 102 mm) |
| Time to Full Rise | 60 seconds |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Shipping Weight | 2,882 lbs. (1,307 kgs) |
| Shipping Dimensions | 201″ x 24″ x 47″ (5,105 mm x 609 mm x 1,193 mm) |
