Dannmar’s D4-9 gives you the versatile productivity that you’ll need so you’ll be able to easily store project cars, classics, daily drivers, and even heavy pickup trucks. This lift comes complete with all the accessories that you’ll need so you can take full advantage of your lift. You’ll receive mobile caster kits, drip trays, aluminum ramps, and much more. The D4-9 serves double-duty, so you’ll get the most bang-for-your-buck.The D4-9 Four-Post Lift from Dannmar is as sturdy and reliable as they come. This lift features welded-steel construction and a long-lasting design. This lift exemplifies Dannmar’s commitment to quality, safety, and value. This lift is built with the strength to lift some very heavy vehicles (up to 9,000 lbs.) and with its impressive lifting speed it can raise and lower in no time.
There are many benefits to the D4-9, and one of the best is the fact that it allows you to store a vehicle fully raised above the ground. This will give you even more floor space than ever before. In other words, both vehicle parking and ground storage on the same footprint.
Every Dannmar D4-9 comes complete with four quick-mount casters. Those will allow you to move the lift easily across the floor. Additionally, lightweight-and-tough polyethylene drip trays, a mobile jack tray, easily removable aluminum approach ramps, forward and rear-mounted hardened steel tire stop, and a set of hard-rubber wheel chocks are included with the Dannmar D4-9 Package.
A Fitting Idea
Because of the D4-9’s convenient size, it can be easily set up in many home garages where space may be limited. The lightweight aluminum ramps make driving on as easy as can be. The D4-9’s multi-position locks add an extra layer of flexibility to the lift. This design makes the D4-9 a great solution to low-vehicle suspensions or shorter overhead height concerns. If you’re looking to add a versatile lift to your shop, Dannmar’s D4-9 four-post lift is the lift for you.
Continuous Improvements
The boxed-steel columns (4.75″ x 4.75″ wide) have been upgraded for maximum strength and outstanding resistance to twisting and flexing. This includes ⅝” thick, 12” x 12” base plates with enhanced support loads on varying floor surfaces. Surrounded by full-perimeter exterior steel sleeves that hold solid capture of the lift columns. The D4-9 is sporting a stability-enhancing design which reinforces the columns by the cradling steel sleeves to provide an interlock that further improves firmness.
Multi-level locking positions
You never want to work under a car while you’re uncomfortable. The D4-9 has multiple lift-parking positions which will allow you to engage your D4-9 four-post car lift at multiple heights. There are thirteen locking positions conveniently placed four inches apart from each other to accommodate technicians of varying height.
Heavy-Duty Aircraft Wire Rope
Four lifting wire ropes are included with every D4-9 lift. They are manufactured from superior-grade stainless steel, with each rope being capable of handling 14,000 lbs. That brings the wire rope rating total to 700% of the lift’s rated capacity.
Automatic Safety Locks
Four, ¾” thick safety locks engage simultaneously as the D4-9 is raised. For the sake of safety, a secondary slack-cable system ensures instant back-up engagement in the unlikely event of a cable failure. At all times, locks are securely trapped by the full-perimeter cross tube sleeves and can’t become dislodged or disengaged.
Simple Operation
Dannmar’s D4-9 proven reliability will offer you easy operation and control as you get a lift that delivers exceptional engineering, while getting the job done quickly. It only takes 45 seconds to get to the max rise!
Professionals You Can Depend On
Dannmar doesn’t just put out high-quality lifts and automotive equipment, they also have incredible customer service during and after your purchase. Dannmar service providers make leading support programs available, including:
- Genuine Dannmar OEM parts
- Planned maintenance
- Convenient national locations
- Three-Year Warranty
When you purchase a new D4-9 four-post lift, we at Wrenchers want you to know that you are getting one of the best lift models with outstanding value. And on the off chance that there are any issues, each D4-9 lift is covered by a complete warranty; backed by Dannmar’s standard 3-year warranty. If any major component fails, it will be replaced. It’s just that simple.
Features
- The D4-9 is designed to be fastened to the floor or free-standing.
- Comes standard with a mobile caster kit, drip trays, mobile jack tray, aluminum approach ramps, hardened steel tire stops and hard rubber wheel chocks.
- Boxed-steel columns are made from structural 4.75” x 4.75″ welded steel tubing.
- Columns feature 12” x 12” baseplates 5/8” thick.
- Manual dead-bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
- 3/4″ thick steel safety locks are spring loaded for automatic and solid engagement.
- 13 positive locking positions are spaced every 4 inches.
- Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
- Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
- Welded-steel runways feature utility rail for jack tray and drip trays and other accessories.
- Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
- Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
- Low-profile runways are only 5″ high to accommodate low ride-height vehicles.
- Hardened steel safety lock linkages use 3/8” molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
- Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
- 5/8″ thick top caps.
- Pull out tire stops on both ends of the lift that allows drive through capability.
- Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
- Pre-assembled cables simplifies installation.
- 36″ aluminum approach ramps are gusseted to eliminate flex and bending.
- 3/4″ runway bolts provide positive attachment with increased safety factor.
- Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.
Specs
| SKU# | 5175319 |
|---|---|
| Lifting Capacity | 9,000 lbs. (4,082 kg) |
| A – Min. Runway Height | 5” (127 mm) |
| B – Max. Rise | 70” (1,778 mm) |
| C – Max. Lifting Height | 75” (1,905 mm) |
| D – Height of Columns | 89” (2,261 mm) |
| E – Drive-Thru Clearance | 86” (2,184 mm) |
| F – Overall Width | 114.5” (2,908 mm) |
| G – Width Between Columns | 98” (2,489 mm) |
| H – Overall Length | 203” (5,156 mm) |
| I – Outside Columns | 176.5” (4,483 mm) |
| J – Width Between Runways | 37.5” (953 mm) |
| K – Runway Centerline | 53.75” (1,365 mm) |
| L – Outside Edge of Runways | 72.5” (1,842 mm) |
| M – Runway Width | 18.75” (476 mm) |
| N – Length of Runways | 165.5” (4,204 mm) |
| Min. Wheelbase @ Rated Capacity | 115” (2,921 mm) |
| Min. Wheelbase @ 75% Capacity | 100” (2,540 mm) |
| Min. Wheelbase @ 50% Capacity | 85” (2,159 mm) |
| Min. Wheelbase @ 25% Capacity | 70” (1,778 mm) |
| 13 (spaced every 4” / 102 mm) | 15 (spaced every 4” / 102 mm) |
| Time to Full Rise | 60 seconds |
| Motor | 110VAC, 50-60HZ, 1PH, 20A or 208-230VAC, 50-60HZ, 1PH, 25A |
| Shipping Weight | 1,188 lbs. (538.9 kgs) |
| Shipping Dimensions | 166″ x 22″ x 41″ (4,216 mm x 558 mm x 1,041 mm) |
